The hardest pencil ever. Why is a simple pencil called "simple"? How is the hardness of a pencil marked in different countries? Graphite drawing pencils "Designer"

graphite pencils , which exist to this day, was invented by a French scientist Nicola Conti in 1794. Usually graphite pencil is called a "simple" pencil, as opposed to colored pencils. Graphite pencils can be divided into two main types: soft and solid. The type is determined by the softness or hardness of the lead inside the body of the pencil. You can tell the type of pencil by looking at the letters and numbers written on it. The letter “M” means that the pencil is soft, and “T” means hard. There is also a type of TM - hard-soft. The degree of hardness or softness of a pencil can be recognized by the numbers written in front of the letter. For example, 2M is twice as soft as M. and 3T is three times harder than T. In many countries of the world abroad, for example, in England, in the USA, the letter H or B is written. H means hard, B - respectively soft, and HB - hard-soft.

A vivid example for comparing pencils can be seen in the figure:

The choice of pencil depends on the type of paper, on the work being done, and also on the personal preferences of the artist. For example, I prefer HB pencils from Faber Castell. It is more convenient to sharpen pencils with stationery knives. Historically, knives for sharpening office supplies (feathers) were called “penknives”. It is very important to keep pencils from falling. On impact, the lead may break into small pieces. It is also important to protect pencils from excessive moisture. During dampening and subsequent drying, the pencil back can be deformed, which will lead to a violation of the integrity of the stylus. There is also another type of graphite pencil called "Mechanical Pencil". They are convenient because they do not need to be sharpened. These pencils have a movable lead. Its length can be adjusted with a button. Mechanical pencils come with very thin leads (from 0.1 mm). There are also mechanical pencils with an intermediate lead thickness. The thickest mechanical pencil lead I've come across is 5mm. Professional artists often like to draw with such pencils.

Marking pencils by hardness

Pencils are distinguished by the hardness of the lead, which is usually indicated on the pencil.

In Russia, graphite drawing pencils are produced in several degrees of hardness, which is indicated by letters, as well as numbers in front of the letters.

In the USA, pencils are marked with numbers, and in Europe and Russia, a mnemonic combination of letters or just one letter.

The letter M stands for soft pencil. In Europe, they use the letter B for this, which is actually short for blackness (something like blackness, so to speak). In the USA they use the number 1.

To designate a hard pencil in Russia, the letter T is used. In Europe, respectively, H, which can be deciphered as hardness (hardness).

A hard-soft pencil is designated as TM. For Europe it will be HB.

A standard hard-soft pencil, in addition to combinations, in Europe can be denoted by the letter F.

For orientation in these international issues, it is convenient to use the table of correspondence of the hardness of the scales, which is given below.

History of pencils

Beginning in the 13th century, artists used thin silver wire for drawing, which they soldered to a pen or kept in a case. This type of pencil was called a "silver pencil". This instrument required a high level of skill, since it is impossible to erase what it has drawn. Its other characteristic feature was that over time, the gray strokes applied with a silver pencil turned brown.

There was also a "lead pencil", which left a discreet but clear mark and was often used for preparatory sketches of portraits. The drawings made with a silver and lead pencil are characterized by a thin line style. For example, Dürer used similar pencils.

Also known is the so-called "Italian pencil", which appeared in the XIV century. It was a core of clay black shale. Then they began to make it from burnt bone powder, fastened with vegetable glue. This tool allowed you to create an intense and rich line. Interestingly, artists still sometimes use silver, lead and Italian pencils when they need to achieve a certain effect.

Graphite pencils have been known since the 16th century. The first description of a graphite pencil was found in the 1564 writings on minerals by the Swiss naturalist Konrad Geisler. By the same time, the discovery of a graphite deposit in England, in Cumberland, where graphite was sawn into pencil rods, dates back. English shepherds from the Cumberland area found a dark mass in the ground, which they used to mark their sheep. Due to the color similar to the color of lead, the deposit was mistaken for deposits of this metal. But, having determined the unsuitability of the new material for making bullets, they began to produce thin sticks pointed at the end from it and used them for drawing. These sticks were soft, dirty hands, and only good for drawing, not writing.

In the 17th century, graphite was usually sold on the streets. Artists, to make it more comfortable and the stick not so soft, clamped these graphite "pencils" between pieces of wood or twigs, wrapped them in paper or tied them with twine.

The first document that mentions a wooden pencil is dated 1683. In Germany, the production of graphite pencils began in Nuremberg. The Germans, mixing graphite with sulfur and glue, received a rod of not such high quality, but at a lower price. To hide this, pencil manufacturers resorted to various tricks. Pieces of pure graphite were inserted into the wooden case of the pencil at the beginning and at the end, while in the middle there was a low-quality artificial core. Sometimes the inside of the pencil was completely empty. The so-called "Nuremberg Goods" did not enjoy a good reputation.

It was only in 1761 that Caspar Faber developed a way to strengthen graphite by mixing crushed graphite powder with resin and antimony, resulting in a thick mass suitable for casting stronger and more uniform graphite rods.

At the end of the 18th century, the Czech I. Hartmut began to make pencil leads from a mixture of graphite and clay, followed by firing. Graphite rods appeared, reminiscent of modern ones. By changing the amount of added clay, it was possible to obtain rods of various hardness. The modern pencil was invented in 1794 by the talented French scientist and inventor Nicolas Jacques Conte. At the end of the 18th century, the English Parliament imposed a strict ban on the export of precious graphite from Cumberland. For violation of this prohibition, the punishment was very severe, up to the death penalty. But despite this, graphite continued to be smuggled into continental Europe, which led to a sharp increase in its price.

On the instructions of the French convention, Conte developed a recipe for mixing graphite with clay and producing high-quality rods from these materials. With the help of high temperatures, high strength was achieved, but even more important was the fact that changing the proportion of the mixture made it possible to make rods of different hardness, which served as the basis for the modern classification of pencils by hardness. It has been calculated that with an 18 cm long pencil one can draw a line of 55 km or write 45,000 words! Polymers are used in modern leads, which allow achieving the desired combination of strength and elasticity, making it possible to produce very thin leads for mechanical pencils (up to 0.3 mm).

The hexagonal shape of the pencil body was proposed at the end of the 19th century by Count Lothar von Fabercastle, noting that round pencils often roll off inclined writing surfaces. Almost 2/3 of the material that makes up a simple pencil goes to waste when it is sharpened. This prompted the American Alonso Townsend Cross to create a metal pencil in 1869. The graphite rod was placed in a metal tube and could, if necessary, be extended to the appropriate length. This invention influenced the development of a whole group of products that are used everywhere today. The simplest design is a mechanical pencil with a 2 mm lead, where the rod is held by metal clamps (collets) - a collet pencil. The collets open when a button on the end of the pencil is pressed, which extends to a user-adjustable length of the pencil.

Modern mechanical pencils are more advanced. Each time the button is pressed, a small section of the lead is automatically fed. Such pencils do not need to be sharpened, they are equipped with a built-in (usually under the lead feed button) eraser and have various fixed line thicknesses (0.3 mm, 0.5 mm, 0.7 mm, 0.9 mm, 1 mm).

Graphite pencil drawings have a grayish tone with a slight sheen, there is no intense blackness in them. The famous French cartoonist Emmanuel Poiret (1858-1909), born in Russia, came up with an aristocratic French-sounding pseudonym Caran d’Ache, which he began to sign his works with. Later, this version of the French transcription of the Russian word "pencil" was chosen as the name and trademark of the Swiss brand CARAN d'ACHE, founded in Geneva in 1924, producing exclusive writing instruments and accessories.

Pencils are an amazing tool that is used for drawing and drawing work. In order for the work to be successful, it is important to know everything about the characteristics of this tool. It is necessary to figure out what they are, what is the decoding of the hardness of a pencil lead and what effects can be obtained when using tools with different characteristics.

Varieties of pencils

Pencils are divided into two large groups: colored and graphite (simple). They, in turn, are divided into varieties. Let's consider each of them in more detail.

Classification of colored instruments:

• Colored. These are the most common tools that everyone used to draw at school. There are hard, soft, soft-hard.
• Watercolor. After painting, they are blurred with water to obtain a watercolor effect.
• Pastel. These are pastel crayons in a wooden frame. They are very soft. They are convenient because they do not get your hands dirty, they are protected from frequent breaking of crayons, and they also have a standard size.

Classification of tools with graphite rod:

• Simple. Just they are most often used in graphics (drawing with pencils). They have many different markings, we'll talk more about them later.
• Coal. They are pressed charcoal for drawing in a wooden frame. The benefits are the same as for pastels.
• Conte. They are almost the same as pastel, but have a different color palette: they come in black, gray, brown and other shades. There is also white in the range of colors.

How to determine the hardness of pencils

Now let's take a closer look at the graphite type. They can depict anything, and very realistically. The works are “alive” thanks to shading, the correct overlay of tone, the right pressure on the tool. Therefore, the whole drawing or drawing as a whole depends on its quality and number.

The scheme is great for determining the hardness of pencils. A table would also work. To visualize and determine the density, you can use the pencil softness table, as well as determine the hardness on a special scale. By the way, you can draw such a scale yourself. To do this, you need to take all the tools that you have and alternately shade small sections of paper with them: from the darkest to the lightest, or vice versa, there will be an H. B marking in the middle. Thanks to this scheme, it will be easy to navigate and remember the type of instrument.

Markings and their meaning

First of all, you can see both English and Russian designations for the hardness of pencils. Let's take a look at both types:

Often, in addition to letters, markings contain numbers that show the strength of hardness or softness and tone. For example, there are 2B, 3B, 4B, 5B, 6B, 8B pencils. 2B is the lightest, 8B is the darkest and softest. The digital marking of hard pencils looks similar.

Applying tone to a drawing

Tone mapping rules are very important when drawing. This is especially true for graphics, because in it the work is created exclusively in one scale: black or gray in combination with white additions.

Hardness of pencils. How to choose pencils. What could be easier than a pencil? This simple tool, familiar to everyone since childhood, is not as primitive as it seems at first glance. It allows you not only to draw, write and draw, but also to create a variety of artistic effects, sketches, paintings! Any artist must be able to draw with a pencil. And, more importantly, understand them. See also: How to sharpen pencils What are pencils? Graphite ("simple") pencils are pretty different from each other. By the way, "pencil" comes from two Turkic words - "kara" and "dash" (black stone). The pen's nib is set in a frame made of wood or plastic, and may be made of graphite, charcoal, or other materials. The most common type - graphite pencils - differ in the degree of rigidity. Let's start! Pavel Chistyakov, professor at the St. Petersburg Academy of Arts of the 19th-early 20th century, advised to start by putting paint aside and practicing drawing "with a pencil for at least a year." The great artist Ilya Repin never parted with pencils. Pencil drawing is the basis of any painting. The human eye distinguishes about 150 shades of gray. An artist who draws with graphite pencils has three colors at his disposal. White (paper color), black and gray (color of graphite pencils of different hardness). These are achromatic colors. Drawing only with a pencil, only in shades of gray allows you to create images that convey the volume of objects, the play of shadows and glare of light. Lead hardness Lead hardness is indicated on the pencil with letters and numbers. Manufacturers from different countries (Europe, USA and Russia) have different markings for the hardness of pencils. Rigidity designation In Russia, the hardness scale looks like this: M - soft; T - solid; TM - hard soft; The European scale is somewhat wider (marking F does not have a Russian equivalent): B - soft, from blackness (blackness); H - hard, from hardness (hardness); F is the middle tone between HB and H (from the English fine point - fineness) HB - hard-soft (Hardness Blackness - hardness-blackness); In the USA, a number scale is used to indicate the hardness of a pencil: - corresponds to B - soft; - corresponds to HB - hard-soft; ½ - corresponds to F - medium between hard-soft and hard; - corresponds to H - solid; - corresponds to 2H - very hard. Pencil pencil strife. Depending on the manufacturer, the tone of the line drawn with a pencil of the same marking may differ. In Russian and European marking of pencils, the number before the letter indicates the degree of softness or hardness. For example, 2B is twice as soft as B and 2H is twice as hard as H. Pencils are commercially available and are labeled 9H (hardest) to 9B (softest). Soft pencils Start from B to 9B. The most commonly used pencil when creating a drawing is HB. However, this is the most common pencil. With this pencil draw the basis, the shape of the picture. HB is good for painting, creating tonal blotches, it's not too hard, not too soft. To draw dark places, highlight them and place accents, a soft 2B pencil will help to make a clear line in the picture. Hard pencils Start from H to 9H. H is a hard pencil, hence the thin, light, "dry" lines. With a hard pencil, draw solid objects with a clear outline (stone, metal). With such a hard pencil, according to the finished drawing, over the shaded or shaded fragments, thin lines are drawn, for example, strands are drawn in the hair. The line drawn with a soft pencil has a slightly loose outline. A soft lead will allow you to reliably draw representatives of the fauna - birds, hares, cats, dogs. If it is necessary to choose between a hard or soft pencil, artists take a pencil with a soft lead. An image drawn with such a pencil is easy to shade with a piece of thin paper, a finger or an eraser. If necessary, you can finely sharpen the graphite core of a soft pencil and draw a thin line similar to the line from a hard pencil. Hatching and drawing Strokes on paper are drawn with a pencil inclined at an angle of about 45 ° to the plane of the sheet. To make the line bolder, you can rotate the pencil around the axis. Light areas are shaded with a hard pencil. Dark areas are correspondingly soft. It is inconvenient to hatch with a very soft pencil, as the stylus quickly becomes dull and the fineness of the line is lost. The way out is to either sharpen the point very often, or use a harder pencil. When drawing, they gradually move from light to dark areas, since it is much easier to darken a part of the drawing with a pencil than to make a dark place lighter. Please note that the pencil must be sharpened not with a simple sharpener, but with a knife. The lead should be 5-7mm long, which allows you to tilt the pencil and achieve the desired effect. Graphite pencil lead is a fragile material. Despite the protection of the wooden shell, the pencil requires careful handling. When dropped, the lead inside the pencil breaks into pieces and then crumbles during sharpening, making the pencil unusable. Nuances that you should know when working with pencils For hatching at the very beginning, you should use a hard pencil. Those. the driest lines are made with a hard pencil. The finished drawing is drawn with a soft pencil to give it richness and expressiveness. Soft pencil leaves dark lines. The more you tilt the pencil, the wider its mark will be. However, with the advent of pencils with a thick lead, this need is no longer necessary. If you do not know how the final drawing will look like, it is recommended to start with a hard pencil. With a hard pencil, you can gradually dial the desired tone. At the very beginning, I myself made the following mistake: I took too soft a pencil, which made the drawing dark and incomprehensible. Frames of pencils Of course, the classic version is a stylus in a wooden frame. But now there are also plastic, varnished and even paper frames. The lead on these pencils is thick. On the one hand, this is good, but on the other hand, such pencils are easy to break if put in a pocket or dropped unsuccessfully. Although there are special cases for carrying pencils.

Such soft material perfectly draws voluminous and large works. Charcoal adds tenderness and softness to the picture, so these pencils well display the translucency of shades and the brightness of tones. They are easy to use, but then need to be coated with a fixing aerosol.

Well, it is clear that these are the most popular pencils in the world, and they are incomparable. But for such art, medium-structured paper is needed, since the pencil will crumble on very soft paper, and it is difficult to draw on rough paper.

Pastels, both in the form of crayons and pencils, are very popular as they are an excellent medium for creating fine details and contours in a drawing. In addition, they make a great background (with crayons). Very easy to use.

These pencils still create incredible masterpieces. Many novice artists begin to draw with watercolor pencils (soluble), although there is also a dry type. It is with dry watercolor pencils that you can achieve expressive clarity and impressiveness of the drawing. To achieve maximum brightness, it is enough to draw with this pencil in thick layers.
Tip: A sharp pencil and wet paper are incompatible things. It is not recommended to do this - ruin everything!

This material is almost similar to coal. Its most basic difference is its stability on rough paper, cardboard and canvas. The color of sanguine has red-brown tones, due to which each drawing will be colorful and warm.

The most ordinary and at the same time one of the most popular pencils, with which great works are created, although this is not an easy task. They vary in hardness, soft ones perfectly depict dark and clear lines, and hard ones fine lines. But the master of his craft has long known that a soft pencil is the best pencil, because when it is well sharpened, it can easily perform the tasks of a hard pencil.
With such a pencil, you can depict small details as clearly as possible and betray the volume of the subject. And some born artists can even display the structure and material itself.

Graphite pencils, in turn, vary in degree of hardness.

Lead hardness

The hardness of the lead is indicated on the pencil with letters and numbers. Manufacturers from different countries (Europe, USA and Russia) have different markings for the hardness of pencils.

In Russia hardness scale looks like this:

• M - soft;
• T - solid;
• TM - hard-soft;

European the scale is somewhat wider (marking F has no Russian equivalent):

• B - soft, from blackness (blackness);
• H - hard, from hardness (hardness);
• F is the middle tone between HB and H (from the English fine point - subtlety)
• HB - hard-soft (Hardness Blackness - hardness-blackness);

IN THE USA a number scale is used to indicate the stiffness of a pencil:

• #1 - corresponds to B - soft;
• #2 - corresponds to HB - hard-soft;
• #2½ - corresponds to F - medium between hard-soft and hard;
• #3 - corresponds to H - hard;
• #4 - corresponds to 2H - very hard.

Pencil pencil strife. Depending on the manufacturer, the tone of the line drawn with a pencil of the same marking may differ.

In Russian and European marking of pencils, the number before the letter indicates the degree of softness or hardness. For example, 2B is twice as soft as B and 2H is twice as hard as H. Pencils are commercially available and are labeled 9H (hardest) to 9B (softest).

soft pencils

Start from B to 9B.

The most commonly used pencil when creating a drawing is HB. However, this is the most common pencil. With this pencil draw the basis, the shape of the picture. HB is good for painting, creating tonal blotches, it's not too hard, not too soft. To draw dark places, highlight them and place accents, a soft 2B pencil will help to make a clear line in the picture.

Hard pencils

Start from H to 9H.
H is a hard pencil, hence the thin, light, “dry” lines. With a hard pencil, draw solid objects with a clear outline (stone, metal). With such a hard pencil, according to the finished drawing, over the shaded or shaded fragments, thin lines are drawn, for example, strands are drawn in the hair.
The line drawn with a soft pencil has a slightly loose outline. A soft lead will allow you to reliably draw representatives of the fauna - birds, hares, cats, dogs.
If it is necessary to choose between a hard or soft pencil, artists take a pencil with a soft lead. An image drawn with such a pencil is easy to shade with a piece of thin paper, a finger or an eraser. If necessary, you can finely sharpen the graphite core of a soft pencil and draw a thin line similar to the line from a hard pencil.

What could be easier than a pencil? This simple tool, familiar to everyone since childhood, is not as primitive as it seems at first glance. It allows you not only to draw, write and draw, but also to create a variety of artistic effects, sketches, paintings! Any artist must be able to draw with a pencil. And, more importantly, understand them.

Graphite ("simple") pencils are pretty different from each other. By the way, "pencil" comes from two Turkic words - "kara" and "dash" (black stone).

The pen's nib is set in a frame made of wood or plastic, and may be made of graphite, charcoal, or other materials. The most common type - graphite pencils - differ in the degree of rigidity.

The human eye distinguishes about 150 shades of gray. An artist who draws with graphite pencils has three colors at his disposal. White (paper color), black and gray (color of graphite pencils of different hardness). These are achromatic colors. Drawing only with a pencil, only in shades of gray allows you to create images that convey the volume of objects, the play of shadows and glare of light.

Lead hardness

The hardness of the lead is indicated on the pencil with letters and numbers. Manufacturers from different countries (Europe, USA and Russia) have different markings for the hardness of pencils.

Rigidity designation

In Russia, the hardness scale looks like this:

M - soft; T - hard; TM - hard soft;

The European scale is somewhat wider (marking F does not have a Russian equivalent):

B - soft, from blackness (blackness); H - hard, from hardness (hardness); F - this is the average tone between HB and H (from the English fine point - thinness) HB - hard-soft (Hardness Blackness - hardness-blackness );

In the US, a scale of numbers is used to indicate the hardness of a pencil:

Corresponds to B - soft; - corresponds to HB - hard-soft; - corresponds to F - medium between hard-soft and hard; - corresponds to H - solid; - corresponds to 2H - very hard.

Pencil pencil strife. Depending on the manufacturer, the tone of the line drawn with a pencil of the same marking may differ.

In Russian and European marking of pencils, the number before the letter indicates the degree of softness or hardness. For example, 2B is twice as soft as B and 2H is twice as hard as H. Pencils are commercially available and are labeled 9H (hardest) to 9B (softest).

soft pencils

Start from B to 9B.

The most commonly used pencil when creating a drawing is HB. However, this is the most common pencil. With this pencil draw the basis, the shape of the picture. HB is good for painting, creating tonal blotches, it's not too hard, not too soft. To draw dark places, highlight them and place accents, a soft 2B pencil will help to make a clear line in the picture.

Hard pencils

Start from H to 9H.

H is a hard pencil, hence the thin, light, "dry" lines. With a hard pencil, draw solid objects with a clear outline (stone, metal). With such a hard pencil, according to the finished drawing, over the shaded or shaded fragments, thin lines are drawn, for example, strands are drawn in the hair.

Hatching and drawing

Strokes on paper are drawn with a pencil inclined at an angle of about 45 ° to the plane of the sheet. To make the line bolder, you can rotate the pencil around the axis.

Light areas are shaded with a hard pencil. Dark areas are correspondingly soft.

When drawing, they gradually move from light to dark areas, since it is much easier to darken a part of the drawing with a pencil than to make a dark place lighter.

Graphite pencil lead is a fragile material. Despite the protection of the wooden shell, the pencil requires careful handling. When dropped, the lead inside the pencil breaks into pieces and then crumbles during sharpening, making the pencil unusable.

And a little about pencils, whose companies you may have known for a long time.

"Constructor"

Well-proven inexpensive pencils are made of high-quality wood, the lead does not break and is easy to sharpen. Eco-friendly, easy to grip, and the stylus hardness markings always correspond to the letters written on the pencil (the last two parameters are quite obvious, but users of various art forums often mention them in their descriptions).

Quite good, high-quality pencils, many artists are a favorite model. Sold in sets of 24 pieces. They have a strong body, sharpen well. As features of these pencils, their persistent and rather specific smell is noted, as well as, pardon the tautology, the softness of soft pencils. They are really much softer than similar models by other companies, the softest ones even crumble and smear a little. But in general, this is a great option even for the pros, very comfortable and high-quality pencils.

“Koh-i-noor”

High-quality, perfectly sharpened, these pencils are easily erased and do not break at all, even after repeated falls on the floor.

Sold individually or in stylish metal boxes - in general, they are a pleasure to use. The only drawback is the price, they are often one of the most expensive in the assortment of a single store. By the way, they got their name in honor of the large Kohinoor diamond, one of the most famous gems in the world.

If you have your favorite brand of pencils, then you can tell us about it in the comments.

Thank you for your attention!