Turquoise color how to get. How to get turquoise color? How to get a dark turquoise color when mixing paints, gouache

Turquoise color, which includes all shades of natural turquoise stone, is a mixture of green and blue colors. The shade of turquoise depends on the ratio of these colors: from sky blue (the color of curacao) to a light green shade of the sea wave (aquamarine). This color is considered the coldest in the spectrum of colors, so it has a calming effect on a person. This effect is used in the design of interiors in which it is necessary to create a peaceful, relaxing atmosphere. The incredibly beautiful color of precious turquoise also looks good in clothes, blending perfectly with natural skin tones.

You will need

blue paint;
- green paint;
- palette;
- brush or palette knife.

Sponsored by P&G Placement Related Articles "How to Get Turquoise" How to Mix Paint Colors How to Wrap Flowers How to Weave a Wide Beaded Bracelet

Instruction

To get a turquoise color, take blue and green paints. These should be pure shades of both colors, as close as possible to the samples on the standard color wheel. Unlike shades of blue, turquoise shades are not just lighter than blue - they are directly related to green.

Take some blue paint on the palette and start adding green to it little by little. Depending on what kind of shade - bluish or greenish - you intend to get, keep mixing these two colors until you achieve the desired result.

The range of shades of turquoise is quite large: it can be both soft, muted, pastel, and bright, juicy colors. The brightness of the color is achieved by using pure undiluted paints that make up the color. To get pastel turquoise shades, add a little white to the color obtained on the palette. By varying their number, you can get colors of varying degrees of brightness. You can also muffle the bright glow of turquoise by adding a small amount of gray paint. The color will acquire no less noble sound.

If you work with water-soluble paints such as watercolors or gouache, then you can also achieve a variety of shades by using turquoise diluted with water. By applying paint on white paper with a loose, transparent layer, you can get lighter shades of turquoise.

From the nature around us - the most ingenious Artist - we can learn the harmonious combination of different colors. Turquoise color includes all shades of water. And the natural companion of water in nature is sand. Therefore, turquoise tones look most harmonious with various shades of sand and earth - brick, bright coral, golden ocher, grayish sand, coffee and many others.

How simple

Other related news:

Roses (Rosa canina) flower buds and petals are considered to be the natural standard for pink. From the name of this plant came the name of the color. This color is not in the primary color palette, but it can be easily obtained. You will need - a palette for mixing paints; - paints; -

It is located between green and blue.

It comes in many variations. It includes both soft and bright, intense colors. If you can’t find ready-made paint, you will have to mix green and blue yourself. As a result, we will get the desired shade. If you try to briefly answer the question of what colors to mix to get turquoise, it should be noted that you have to use cyan blue and less green. We will discuss in more detail in this article.

Color selection

So, we need, How to get it in practice, now we will describe in detail. First you need to decide on the desired shade. The word "turquoise" most often refers to a mixture of green and blue with a predominance of the first. However, we can achieve different shades.

It's easy to add a drop of light gray or white paint. As a result, we get a more delicate shade. You can also mix rich blue, green and yellow. As a result, we get a bright turquoise. It remains to choose between a bright or soft shade.

The foundation

So, earlier we already managed to get the turquoise color. How to get it in other ways, we will consider further. We have already figured out that we will need blue and green paint. Their basis can be any water, oil, acrylic.

However, it should be remembered that the same type of paint mixes better. It is best to buy everything you need in one of the specialized stores for artists. In this case, you should study the entire range presented. It may be possible to find the desired shade in finished form.

Watercolor

How to get a turquoise color when mixing paints, we already know: we need yellow, green and However, it is better to take them in a small drop in order to achieve the utmost precision when creating the required paint. If you are an aspiring artist, it is better to give preference to watercolor. This type of paint is easy to handle. Plus, they mix really well. Watercolors are usually sold in small tubes. For pale shades, yellow paint is suitable.

Water and space

If you're wondering how to get turquoise mixed together to be more muted, mix green and blue with white. Suppose the picture is a tropical beach, then use a warm cream as the basis for transferring the image of sea water onto paper.

A purer white would be suitable for creating a picture of a distant cold turquoise planet. Let's use shades of blue, which is close to the green spectrum. You can try ultramarine, azure, cobalt, cyan or any other similar option. The main thing is that it should be closer to green than purple.

Any pigment in itself contains a small amount of other colors. Thus, paint of an arbitrary shade will mix well with another color. In practice, this is very convenient.

Saturated color

So, to solve the question of how to get a turquoise color when mixing paints, blue and are used. However, you can achieve an even better result. For this we will use blue paint containing green pigments. It is impossible to find a "pure" basis.

In particular, this applies to blue. In theory, it should give a good green with yellow, and a great purple with red. In practice, these lines are blurred. The fact is that blue always approaches red or green due to the imperfect chemical purity of each pigment.

To obtain an extremely saturated color, we take the necessary ingredients. We are talking about the already familiar to us blue and green shades.

1. We apply a small amount of cyan paint to the edge of the palette. In this case, it should be blue-green.
2. Let's move on to the next step. Place some green paint next to it. If not, you can get this color yourself. To do this, mix an equal amount of yellow and blue. Instead of a palette, any clean, dry surface will do. However, an item that is used in this way can no longer be used for anything else.
3. We mix blue and green in a ratio of 2: 1. The first pigment should be more. You can also experiment with proportions, but it is better to use the ratio given as a sample. A little more green paint will give a rich shade of sea wave. If we reduce the amount of green, we get a subtle turquoise. It will approach blue.

So we figured out what elements the turquoise color consists of. How to get it is detailed above.

One of the most beautiful colors on earth is turquoise. It strikes with its piercing and beauty, incomparable with any other color. In common people it is called the color of the sea wave. Turquoise is a very fashionable color, it is used in the interior, clothing and much more. Widespread in home interiors, but do not overdo it, as you can achieve an unsatisfactory result, it is better to harmonize it with various shades of other colors. Turquoise color in any interior brings only positive emotions.

He has always commanded respect from people engaged in public service and hard mental work, as he has the ability to assist in making the right decisions. Turquoise was considered the imperial stone of ancient Egypt, and after death, their tombs were trimmed with turquoise. Turquoise color is made up of several shades: green-blue and blue. The color of turquoise belongs to cool colors, but compared to other colors of the same group, it is the warmest. Like many other colors, turquoise has its own meaning and effect on people. This color brings a feeling of freshness and natural purity.

Turquoise color has a very strong effect on a person, is able to relieve irritability and fatigue. The difference in its shades is wide - from soft turquoise to deep blue-green. Turquoise color is used in the design of health-improving spas, massage rooms. Usually it is combined with white. This is not surprising, since it, like no other, gives a feeling of calm and relaxation. Doctors have identified its significant impact on recovery in rehabilitation centers.

In addition, doctors advise most of the time to be in his environment in order to achieve the best result. So how do you get turquoise? To do this, you need to mix several paints of different colors. You can get turquoise shades if you take blue or blue-green paint by mixing it with white. To make turquoise at home, you will need paints with blue and green. It is desirable that these be the purest shades, close to the typical color wheel samples. You need to take a small amount of blue paint and mix in a little green.

It all depends on the artist, what shade he wants to have in the end, bluish or greenish, you just need to keep adding green to get the desired result. In order to make the maximum brightness of the color, it is necessary to use undiluted paint palettes. In many ways, the color depends on the paints used, it is preferable to use watercolors and gouache paints, since only they are able to more accurately convey the brightness of the turquoise color. It is not difficult, and everyone can afford to make and use this most beautiful color. You need to try and experiment, draw and enjoy the beautiful.

It is located between green and blue.

It comes in many variations. It includes both soft and bright, intense colors. If you can’t find ready-made paint, you will have to mix green and blue yourself. As a result, we will get the desired shade. If you try to briefly answer the question of what colors to mix to get turquoise, it should be noted that you have to use cyan blue and less green. We will discuss in more detail in this article.

Color selection

So, we need, How to get it in practice, now we will describe in detail. First you need to decide on the desired shade. The word "turquoise" most often refers to a mixture of green and blue with a predominance of the first. However, we can achieve different shades.

It's easy to add a drop of light gray or white paint. As a result, we get a more delicate shade. You can also mix rich blue, green and yellow. As a result, we get a bright turquoise. It remains to choose between a bright or soft shade.

The foundation

So, earlier we already managed to get the turquoise color. How to get it in other ways, we will consider further. We have already figured out that we will need blue and green paint. Their basis can be any water, oil, acrylic.

However, it should be remembered that the same type of paint mixes better. It is best to buy everything you need in one of the specialized stores for artists. In this case, you should study the entire range presented. It may be possible to find the desired shade in finished form.

Watercolor

How to get a turquoise color when mixing paints, we already know: we need yellow, green and However, it is better to take them in a small drop in order to achieve the utmost precision when creating the required paint. If you are an aspiring artist, it is better to give preference to watercolor. This type of paint is easy to handle. Plus, they mix really well. Watercolors are usually sold in small tubes. For pale shades, yellow paint is suitable.

Water and space

If you're wondering how to get turquoise mixed together to be more muted, mix green and blue with white. Suppose the picture is a tropical beach, then use a warm cream as the basis for transferring the image of sea water onto paper.

A purer white would be suitable for creating a picture of a distant cold turquoise planet. Let's use shades of blue, which is close to the green spectrum. You can try ultramarine, azure, cobalt, cyan or any other similar option. The main thing is that it should be closer to green than purple.

Any pigment in itself contains a small amount of other colors. Thus, paint of an arbitrary shade will mix well with another color. In practice, this is very convenient.

Saturated color

So, to solve the question of how to get a turquoise color when mixing paints, blue and are used. However, you can achieve an even better result. For this we will use blue paint containing green pigments. It is impossible to find a "pure" basis.

In particular, this applies to blue. In theory, it should give a good green with yellow, and a great purple with red. In practice, these lines are blurred. The fact is that blue always approaches red or green due to the imperfect chemical purity of each pigment.

To obtain an extremely saturated color, we take the necessary ingredients. We are talking about the already familiar to us blue and green shades.

1. We apply a small amount of cyan paint to the edge of the palette. In this case, it should be blue-green.
2. Let's move on to the next step. Place some green paint next to it. If not, you can get this color yourself. To do this, mix an equal amount of yellow and blue. Instead of a palette, any clean, dry surface will do. However, an item that is used in this way can no longer be used for anything else.
3. We mix blue and green in a ratio of 2: 1. The first pigment should be more. You can also experiment with proportions, but it is better to use the ratio given as a sample. A little more green paint will give a rich shade of sea wave. If we reduce the amount of green, we get a subtle turquoise. It will approach blue.

So we figured out what elements the turquoise color consists of. How to get it is detailed above.

If you don’t have turquoise in your palette, then getting it is not difficult. To do this, mix white, blue and green paint. But keep in mind that you need to constantly experiment to get the right color.

The turquoise color is very beautiful, it is obtained by combining three colors, blue, plus white and plus green. Although you can probably get by with two colors, for example, if you use blue and light green.

To get a turquoise color, you need to take white paint and mix it with blue. If you add green, you get a sea wave. For some reason, many people confuse this color with turquoise. Turquoise is obtained by mixing titanium dioxide and phthalocyanine blue pigments. If we take titanium dioxide, blue phthalocyanine and add green phthalocyanine, we get a sea wave.

Turquoise color consists of green-blue shades. And in order to get this color by mixing paints, first you need to combine blue and white colors with each other, you get blue. and then slowly add green paint to this mixture, but the main thing here is not to overdo it.

If the color turned out to be too dense, then you can dilute it a little with some water; this method is perfect for watercolor.



Usually turquoise color is obtained from three colors: green, blue and white. If you're painting with watercolors, try mixing your paints with a brush on a clean piece of paper. If preparing paint for painting a house or a fence, add one paint to another and stir until an even color is obtained.

Turquoise is not a primary color, so it is usually obtained by mixing green and blue paint. In order to adjust the intensity of the turquoise color, the paint can be diluted with water or white paint can be added. Or use light green paint.

• Turquoise

  

  Turquoise is something between blue and white. Although turquoise comes in different shades. Sometimes there is still a greenish tint in it, but in the photo that I took, green is not felt, although it is present in the brightness components. Therefore, try mixing white and blue colors in different proportions, plus you can add a little more green.

  I decided to check what brightness this color consists of, taking a color sample from 3, different lighting, places, and this is what I got:

You need to experiment with paints to get the right color, so you can try to go the simplest way and try mixing blue paint and green paint to achieve the desired color.

But the best option is to add a little bit of blue-green to the yellow-green paint, correcting it with white paint.

Turquoise, named after the stone, is a shade of blue that can be seen in some bodies of water. Shades of turquoise are also naturally visible during the northern and southern auroras. Since turquoise is not a primary color, artists mix blue and green to create this striking hue.

To obtain turquoise, which in nature has a stone called turquoise, we will need several different colors: green and blue.

There are several shades of turquoise: light green (aquamarine) and sky blue.

Turquoise is the color of peace of mind.



duplicate blue, plus white and plus green

Usually there is no turquoise color in the palette and it can be obtained by mixing paints of other colors.

The diagram below says how many percent you need to take one or another color of paint to get a turquoise color. And it can be both bright and muted.

Turquoise color carries a mixture of blue and green colors and everything depends only on their taken proportion.



In order to get a pure turquoise color, you must take a certain amount of blue paint onto the palette, and after that green paint begins to be introduced into it.

It all depends on what kind of color you want to get, focus on the percentage of colors to get the desired result.

Turquoise, which includes all shades of natural turquoise stone, is a mixture of green and blue. The shade of turquoise depends on the ratio of these colors: from sky blue (the color of curacao) to a clear green shade of the sea wave (aquamarine). This color is considered the coldest in the spectrum of colors, therefore it has a calming effect on a person. This result is used in the design of interiors in which you need to create a peaceful, relaxing atmosphere. The unimaginably beautiful color of precious turquoise looks great in clothes, perfectly harmonizing with natural skin tones.

You will need

• - blue paint;
• – green paint;
• - palette;
• - a brush or palette knife.

Instruction

1. To acquire a turquoise color, take blue and green paints. These must be pure shades of both colors, as close as possible to the examples on the standard color wheel. Unlike shades of blue, turquoise shades are not primitively lighter than blue - they are directly related to green.

2. Take some blue paint on the palette and start adding green to it little by little. Depending on what kind of shade - bluish or greenish - you intend to get, continue to mix these two colors until you achieve the desired result.

3. The range of shades of turquoise is quite huge: it can be both soft, muted, pastel, and brilliant, juicy colors. The brightness of the color is achieved by using pure undiluted paints that make up the color. In order to get pastel turquoise shades, add a little white to the color obtained on the palette. By varying their number, it is possible to obtain colors of varying degrees of brightness. To muffle the bright glow of turquoise is also possible by adding a small amount of gray paint. The color will get no less decent sound.

4. If you work with water-soluble paints such as watercolors or gouache, then you can also achieve a variety of shades by using turquoise diluted with water. Applying paint on white paper with a loose, transparent layer, it is possible to get more clear shades of turquoise.

5. From the nature around us - the most talented Artist - we can learn the harmonious combination of different colors. Turquoise color includes all shades of water. And the natural companion of water in nature is sand. Consequently, turquoise tones look more harmoniously than anyone with diverse shades of sand and earth - brick, clear coral, golden ocher, grayish sandy, coffee and many others.

Note!
Experts do not recommend using turquoise in the interior of a children's room. With its calming and relaxing effect, it can slow down the child's tendency to become.

Modern interior design is full of original shades. The range of finished products does not always contain the desired semitone. The color mixing table will help you get the desired result at home. The information is useful not only when renovating an apartment. Knowledge of mixing colors is useful to a wide range of people: novice painters, car repair workers, decorators and other creative people.

Blending experiments: what you need to know in advance

The world around us is filled with a wide color palette, but all the colorful splendor is based on three primary colors: blue, red and yellow. It is due to their mixing that the desired semitone is achieved.

To get a new shade, use base colors in various proportions. The simplest example of how to get green. The answer is extremely simple: mixing yellow dye with blue. An illustrative table of primary, secondary and transitional colors obtained by mixing is presented below:

This table will help you understand that the question of how to get yellow is in itself incorrect. It cannot be achieved by combining other components, since yellow belongs to the three main tones. Therefore, when a need arises for yellow, they acquire a ready-made dye or extract a pigment from natural products, which is not entirely advisable.

The same initial colors, taken in different proportions, when mixed, give a new result. The larger the volume of one dye, the final result after mixing will be closer to the original shade.

It is necessary to conduct experiments taking into account well-known rules. If you combine chromatic colors that are close to each other in the color wheel, after mixing, you get a paint with a pronounced chromatic tint, although not having a pure tone. The combination of dyes located on opposite sides leads to the formation of an achromatic tone, in which a gray tint predominates. The chromatic circle will help you navigate in the optimal combination of colors:

Attention! Mixing dyes does not always lead to a stable result. Some paints, when combined, provoke a chemical reaction, due to which the decorative coating subsequently cracks. There are cases when the desired background becomes gray or dark over time.

For example, if you take red cinnabar and white lead, the resulting bright pink color will darken after some time. It is advisable to take the most limited number of initial paints to obtain the desired tone. When mixing, their compatibility must be taken into account. For example, oil-based dyes are sensitive to solvents. Darkening or quickly fading materials are best excluded immediately. A table of combinations that should not be used will prevent mistakes in the creative process:

Variety of shades of red

Red is one of the three original colors that make up the base. Therefore, even a minimal set of colors cannot do without it. However, the question of how to get red when mixing paints sometimes still arises. This is due to the fact that magenta is involved in printing, so creative searches for how to get red are natural. Everything is solved extremely simply: to obtain natural red, yellow is mixed with magenta in volumes of 1: 1.

The color scheme of red is diverse, therefore there are many combination options:

Comment! A beautiful purple color cannot be obtained by combining violet with red. The only way to achieve a bright shade is to find a red paint without yellow impurities and mix it with blue.

The following circle demonstrates the variety of shades of red. It is worth noting that the addition of white colors to any mixture leads to a lightening of the tone, and black to a darkening.

The following table will help you understand the names of shades of red:

Variations in blue

An equally rich palette of shades gives mixing with blue dye, which is part of the basic triad. Therefore, its presence in any set is mandatory. However, even a set of 12 paints sometimes does not meet the need for a true blue tone. The reason is color variations. The classic tone is called royal, and on sale it is often replaced by ultramarine, which is characterized by a bright dark hue with a slight presence of purple. Therefore, the question of how to get the blue color no longer seems absurd. The way out of the situation is to add white to the base color in a ratio of 3: 1. Blue is obtained in the same way, only white is used more when combined.

An interesting color of blue with a moderately saturated result is obtained by combining a darkish ultramarine with turquoise.

• Equal volumes of blue and yellow dye will produce a dark blue-green tone. The introduction of white contributes to some lightening, but the brightness is reduced. The reason lies in the combination of three components, and the more of them, the more dull the color.
• To get a turquoise color, cyan blue is mixed and a slightly smaller amount of green is added. This shade is also called aquamarine.
• The color obtained from equal volumes of blue and light green is called Prussian blue. With the introduction of white, the saturation decreases, but the purity of the hue does not go away.
• Blue with red colors in a ratio of 2: 1 give blue with a hint of purple. The resulting color is lightened by the introduction of white.
• Mixing blue and pink magenta in equal parts will give royal blue, which is characterized by unusual brightness.
• Darken blue is obtained by mixing it with black in a ratio of 3:1.

An assistant in mixing experiments will be a table with the names of shades of blue:

Variety of green

The original green is usually presented in all sets; in the absence of the desired dye, there are no problems with obtaining. Combining yellow with blue gives the desired green background. But any direction of creativity, be it painting, interior design or another option for decorating objects, requires a wide palette of green. The basic principle of all experiments is to change the proportions of the base colors, white or black dye is used to lighten or darken the background.

• The combination of blue and yellow with a slight addition of brown represents khaki. Green with a small amount of yellow forms olive.
• Traditional light green - the result of mixing green with white. Adding yellow or blue will help regulate warmth.

  Attention! The quality of the original components affects the saturation of the green color. The more intense the base tones, the brighter the blending result will be.

• A yellow-green effect will be obtained by combining yellow with blue in a ratio of 2: 1. Reverse proportion will result in a blue-green tone.
• Dark green is achieved by adding half the black.
• A warm light green background is formed from a mixture of white, blue and yellow paint in a ratio of 2:1:1.

A variety of colors of green hue demonstrates a circle. The base dye is located in the center, then there is an additional component, after - the result of mixing. The last circle is the experiments of the resulting tone with the addition of white and black dye.

The next table will become an assistant during the experiments.

Other color combinations

The color kaleidoscope is not limited to the combination of basic dyes. For example, gray is often required. Different proportions of white and black pigment will give a wide achromatic palette.

How to get ivory? The base will be white, ocher and dark brown are gradually added to it in small portions. Ocher contributes to the manifestation of warm tones, an increase in brown leads to a cold background.

Another table shows many blending options:

How to get black color? By combining cyan, yellow and magenta. They are not always available, so three basic dyes will become an assistant. Combining green with red will also give some semblance of black, but it will not be pure.

Conclusion

Even if you didn’t find a description for which question, tables will be of help, which not only provide recommendations for mixing, but also clearly demonstrate the result of the experiments. The results of our own mixing experiments may differ slightly from those stated above, it all depends on the composition of the dye and the surface on which it is applied.